10 Best Straight Edge For Woodworking in 2022

Best Straight Edge For Woodworking

I’m sure that you know what a straight edge is. It is a tool that is used to cut straight lines. So, if you want to make a straight edge, you will need a straight edge. A straight edge is a very important tool in woodworking. But, it can be very difficult to find a good one. There are some problems when you use a straight edge.

So, it is better to choose the right straight edge. In this post, you will learn about the 10 best straight edges for woodworking.

Our Top Picks

Fulton 24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe LinesBuy Now
Woodpeckers Precision Woodworking Tools SERXL-36 Straight Edge Rule, 36-Inch Buy Now
Kreg Straight Edge Guide XL-8 Ft Buy Now
POWERTEC 71227 24″ Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.001” Over Full 24” – Professional Finishing Tools Buy Now
POWERTEC 71332 38″ Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.003” Over Full 38” – Professional Finishing Tools Buy Now
38″ Anodized Aluminum Straight Edge Guaranteed Straight to Within .003″ Over Full 38″ Length 108511 Buy Now
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp) Buy Now
DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router Buy Now
Starrett 380-48 48-Inch Steel Straight Edge Buy Now
Bora 100-Inch NGX Clamp Edge, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length, 544100 Buy Now

1. Bora 100-Inch NGX Clamp Edge

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jigsaws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

2. ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s, and more! ProGrip Straight Edge Guides are not only great straight edge guides, but they are also super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra-wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for an everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jigsaws, and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

3. 38″ Anodized Aluminum Straight Edge


4. Kreg Straight Edge Guide XL-8 Ft

  • Crosscut and rip cut material up to 8 feet (244cm)
  • Aluminum guide rail leads cut precisely along a straight line
  • Cutline indicators help position cuts perfectly
  • Built-in clamping with GripMaxx secures the rail to material
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers

5. Woodpeckers Precision Woodworking Tools SERXL-36 Straight Edge Rule

  • Both edges are precision milled for true parallel and reliable straightness
  • Perfect tool for aligning table saw extension wings
  • Bottom edge is formed with a center groove for added stability
  • Features a white band along its face to increase contrast with the surface being checked
  • Set comes in a fitted MDF wall mountable case

6. DCT Aluminum Pro Grip Clamp Straight Edge

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24” Inch / 62cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 30.5” x 2.1” x 0.5” inches (77.5cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with an integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold the workpiece securely and are predrilled for an accessory; When clamped, this solid guide shows no play and it tightly holds its grip
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 24 inches/62cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jigsaw, circular table saw, router straight cut, or joiner cut
  • EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place

7. POWERTEC 71227 24″ Anodized Aluminum Straight Edge

  • FUNCTION: A cost-effective alternative to determining table surface flatness, and engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers, and various others
  • FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized
  • ALUMINUM CONSTRUCTION: This heavy-duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion
  • VERSATILE: Can be used as a straight edge guide for machines, drafting tools, drawing bars, or even to check cylinder head distortion – the possibilities are endless
  • SCALE: Straight edge ruler measures out to 24 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual-sided metric and standard ruler measurement system

8. POWERTEC 71332 38″ Anodized Aluminum Straight Edge

  • FUNCTION: A cost-effective alternative to determining table surface flatness, and engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers, and various others
  • FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized
  • ALUMINUM CONSTRUCTION: This heavy-duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion
  • VERSATILE: Can be used as a straight edge guide for machines, drafting tools, drawing bars, or even to check cylinder head distortion – the possibilities are endless
  • SCALE: Straight edge ruler measures out to 38 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual-sided metric and standard ruler measurement system

9. Fulton 24 inch 38 inch and 50-inch Anodized Aluminum Straight Edge Bars

  • Sometimes you need to have your work surface just right for your projects. Whether you’re a woodworker, metal worker, or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
  • Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits, or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, tabletops, countertops, and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
  • The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, tabletops, countertops, and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
  • The bars measure 3/8” thick by 1¾” tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. 24-inch straight edge has a .001″ tolerance, the 38-inch straight edge has a .002″ tolerance and the 50-inch straight edge has a .003″ tolerance.

10. Starrett 380-48 48-Inch Steel Straight Edge

  • Precision ground and nicely finished to rigid Starrett standards
  • Their thickness and design permit them to retain their shape and accuracy
  • Unexcelled for drawing or scribing straight lines and checking surfaces for straightness
  • They are not beveled or graduated. Thickness- 7/32 inch. Width- 2-13/32 inch. Accuracy- ± .0002 inch per foot

FAQ

What is a good straight edge?

A straight edge is a piece of wood that has been cut on one side and can be used to measure out materials, lines, etc. The best straight edges for DIY projects are made from hardwoods like maple and cherry. Hardwoods have a nice grain pattern and are more durable than softwoods.

How do you get the perfect straight edge on wood?

You should first make sure that the wood you’re working with is straight. If it’s not straight, you can use a hand plane, a router, or a belt sander to make it straight. Then, use a sanding block, a drum sander, or a belt sander to remove the excess wood. Finally, use a utility knife or a fine saw to smooth and finish the edge.

What can I use for straight edge?

You can use almost anything for straight edge. Just make sure that it doesn’t have any sharp edges that might hurt you. Most common materials include wood, plastic, metal, foam, cardboard, and glass. Some of these materials can be used as straight edges, while others can’t.

What is a straight edge used for in woodworking?

A straight edge is used to cut, plane, and measure wood. It consists of a thin strip of metal that is attached to a sturdy wooden handle. You can use a regular pencil for this purpose, but it’s not recommended.

Conclusion

The most important thing to keep in mind when choosing a straight edge is to make sure it is sturdy and will last. You should also look for a straight edge that is easy to use and has a sharp edge that is easy to clean. The best straight edge for woodworking is a simple piece of metal with a sharp edge and a flat surface that you can use to cut a straight line.

Leave a Comment

Your email address will not be published.

Scroll to Top